Note: the way Linux' hotplugging stuff works, you may need to plug in the scanner after the computer has booted. HP 4400C, HP 4470C - uncomment the hp_rts88xx line. HP 3300C, HP 3400C, HP 4300C, Afga Snapscan Touch - uncomment the niash line. ![]() Uncomment (delete the #) the correct one for your scanner, e.g.: # but are provided by the libsane-extras Debian package # The following backends are not part of the SANE distribution To enable the right driver for your scanner look for the following lines: Search Synaptic for "libsane-extras" or alternatively type the following command in the terminal:.The easiest way to do this is probably through Synaptic. Make sure the Universe repository is enabled. Here is a list of scanners with incomplete drivers: These drivers can still be used, but not all features may work. The SANE project does not always provide complete drivers for all scanners. You can become member of group scanner: go to Administrations -> Users and Groups -> Account Properties -> User Privileges. The device /dev/parport0 (or whichever parallel port your scanner is connected to) by default is only readable and writable by user lp and group scanner. Your scanner is parallel port and you are not a member of the scanner group. Rename it to "b" and then put it in the directory "/usr/share/sane/gt68xx" (remember to give read permission to all users). If the CD only supports Windows, try installing the CD with WINE- don't use the program instead search for the firmware file and coy this file "ccd548.fw" into /usr/share/sane/gt68xx/.įor a Mustek 1200 UB Plus scanner you will need this file b. ![]() Tip: In my case I got the firmware file from the CD that came with the scanner. Once you got the right firmware file copy it into /usr/share/sane/. Try to find the firmware file on the documentation provided with your scanner or search online. You need to install the appropriate firmware (probably a *.fw or *.usb) for your particular scanner. The required driver for your scanner has not been autoloaded.The most common type of unsupported scanners are old parallel port or Lexmark All-in-One printer/scanner/faxes. Your scanner is not supported in Ubuntu.Try to run the scanning software as root. ![]() There could be several reasons why you might get this message: Don't forget to Save when you are finished! If you want to create a multi-page file exchange the documents on the scanner and repeat the scanning process until all pages are scanned. Once the scanning process is finished a thumbnail image is displayed. Alternatively you can also press the "Scan" button on the scanner to open the scanning dialog. Go to Applications -> Graphics -> XSane Image Scanner or SimpleScan. Turn on your scanner and place a document or photo face down on the scanner.SANE project listing of supported scanners - The SANE (Scanner Access Now Easy) project provides most of the backends to the scanning software on Ubuntu. Hardware Support Component Scanners - check which scanners are supported in your specific Ubuntu release. Simply plug it in and try! If it is a newer model USB scanner, it is likely that it will work immediately without any further driver or software installations.How can I find out if my scanner works with Ubuntu? How can I find out if my scanner works with Ubuntu?.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |